Guide
Raw vs Cooked Weight: Which to Use When Counting Calories
Calories per 100 g differ sharply between raw and cooked foods because cooking changes water content: rice and pasta absorb water, while meat and baked potatoes lose it. The dependable rule is to log each food with the database entry whose state (raw, dry or cooked) matches the state in which it was weighed, and to keep the method consistent. USDA data list, for example, 365 kcal per 100 g for raw white rice and 130 kcal per 100 g for cooked white rice.
Why the weighing state matters
Cooking changes the weight of food without changing its energy by the same proportion. The USDA Nutrient Data Laboratory describes cooking yields as changes in food weight due to moisture loss (such as evaporation or drip), water absorption (such as boiling) or fat gains and losses during preparation. Dry rice and pasta absorb water and become heavier per portion; meat and baked potatoes lose water and become lighter.
The result is that the same food has very different energy density per 100 g depending on its state. In USDA FoodData Central, raw long-grain white rice contains 11.6 g of water per 100 g and 365 kcal, while cooked rice contains 68.4 g of water per 100 g and 130 kcal. Logging a 150 g portion of cooked rice with the raw entry would give about 548 kcal (150 × 3.65), whereas the cooked entry gives about 195 kcal (150 × 1.30), a difference of roughly 350 kcal from the database choice alone. These figures are simple arithmetic on the USDA values.
How USDA FoodData Central labels raw and cooked entries
FoodData Central records the state of the food in the entry description: words such as raw, dry, cooked, roasted, baked or broiled identify what was analyzed or calculated, and the nutrient values are listed per 100 g of the food in that state. The entries used below come from the SR Legacy data type, which USDA states is the final release of that data type and will not be updated.
USDA cooking-yield documentation explains that composition data are needed for both uncooked and cooked forms, but analytical data for cooked foods are generally unavailable. For that reason, cooked values are frequently calculated from the raw food by applying cooking yield factors. This means that a cooked entry represents an average preparation, and an individual meal can differ in water content, fat and weight.
| Food | Raw or dry: kcal / water (g) | Cooked: kcal / water (g) | Cooked entry |
|---|---|---|---|
| White rice, long-grain, regular, enriched | 365 / 11.6 | 130 / 68.4 | Cooked |
| Pasta, enriched | 371 / 9.9 | 158 / 62.1 | Cooked, without added salt |
| Chicken breast, meat and skin | 172 / 69.5 | 197 / 62.4 | Cooked, roasted |
| Ground beef, 85% lean meat / 15% fat | 215 / 65.7 | 250 / 58.0 | Patty, cooked, broiled |
| Potato, flesh and skin | 77 / 79.2 | 93 / 74.9 | Baked, without salt |
Typical yields
A yield describes how much cooked weight results from a given raw weight. For meat and poultry, USDA publishes measured yields. In its Table of Cooking Yields for Meat and Poultry (Release 2, 2014), yield is calculated as 100 × hot cooked weight ÷ raw weight, and the table also reports moisture and fat change as a percentage of raw weight. For chicken breast with skin, baked or roasted (NDB 5060), the table lists a yield of 72% with a range of 61-82%. For medium-fat (12-22%) ground beef patties, broiled or grilled (NDB 23573), it lists 69% (range 63.96-72.42%, n = 4), a moisture change of -25.1% and a fat change of -5.17%, meaning roughly 25 g of water and 5 g of fat lost per 100 g of raw meat.
The USDA yield table covers meat and poultry only. For rice, pasta and potatoes, the figures below are derived from the water content in the FoodData Central entries: raw solids divided by cooked solids per 100 g, assuming no solids are lost to cooking water. They match the ratio of the energy values (365 ÷ 130 = 2.81 for rice; 371 ÷ 158 = 2.35 for pasta) and are arithmetic estimates rather than USDA yield factors. They also depend on the water used and the cooking time, so a household batch will differ.
| Food | Cooked weight from 100 g raw | Basis |
|---|---|---|
| White rice, long-grain, regular, enriched | about 280 g | Derived: (100 − 11.6) ÷ (100 − 68.4) from FoodData Central water values |
| Pasta, enriched | about 238 g | Derived: (100 − 9.9) ÷ (100 − 62.1) |
| Potato, flesh and skin, baked | about 83 g | Derived: (100 − 79.2) ÷ (100 − 74.9) |
| Chicken breast, meat and skin, baked or roasted | 72 g (range 61-82 g) | USDA Table of Cooking Yields, NDB 5060, release year 1975 |
| Ground beef, medium fat (12-22%), patty, broiled or grilled | 69 g (range 64-72 g) | USDA Table of Cooking Yields, NDB 23573, release year 2002 |
A consistency rule of thumb
The principle is to match the weight to the entry. Either state can be tracked accurately, provided the weighing state and the database entry agree and the same method is used day to day. Raw weights are less affected by the variation in cooked yield, which the USDA ranges above illustrate. Practical steps:
- Weigh the food in the state the entry describes: raw weight with a raw or dry entry, cooked weight with a cooked entry.
- Check which state the per-100 g values on a package label describe before pairing them with a weight.
- When cooking from raw, weigh before cooking if possible, and weigh the food in the form the entry names, for example with or without skin or bones and with or without drained liquid.
- To calibrate a household batch of rice or pasta, weigh the dry portion, cook it, weigh the whole cooked batch, and use the ratio as a personal factor.
- Do not switch between raw and cooked entries for the same food within a day or a week, since mixing them introduces differences of the size shown in the first table.
Mixed dishes and restaurant meals
Mixed dishes such as stews, casseroles and sauces have no single raw or cooked entry. A recipe approach works: weigh the raw ingredients as they go into the pot, weigh the finished dish, and divide the total energy by the finished weight to obtain kcal per gram, then weigh the portion eaten. Fat added during cooking, such as oil, should be included as an ingredient.
Restaurant meals cannot be weighed raw, so the figure is an estimate whichever source is used. A 2011 study in JAMA measured the energy content of 269 food items from 42 restaurants by bomb calorimetry. Stated energy contents did not differ significantly from measured values on average (a difference of 10 kcal per portion, 95% confidence interval -15 to 34), but 50 of the 269 items (19%) contained at least 100 kcal per portion more than stated, and foods with lower stated energy tended to contain more than stated. Treat restaurant entries as approximate ranges and log them consistently.
This article is general information on measuring food and is not medical or dietary advice.
Frequently asked questions
Should I weigh food raw or cooked when tracking calories?
Either works if the database entry matches the state in which the food was weighed. Raw weight is less affected by differences in cooking, because cooked yield varies with the method and doneness; USDA lists chicken breast yields of 61-82%, for example.
How many calories are in 100 g of cooked white rice compared with raw?
USDA FoodData Central (SR Legacy) lists 130 kcal per 100 g for cooked long-grain white rice and 365 kcal per 100 g for the raw, enriched grain. The difference is mainly water: 68.4 g per 100 g cooked versus 11.6 g raw.
Does cooking change the calories in food?
Cooking mostly changes weight through water loss or absorption, so kcal per 100 g changes. Energy can also change if fat is lost or gained: for broiled medium-fat ground beef patties, USDA reports a fat change of -5.17% of raw weight, while frying or adding oil can add fat.
What should I do when I cannot tell how a food was weighed?
Choose the entry that closely matches the form of the food on the plate, note the assumption, and use the same choice each time. Consistent logging makes it easier to adjust targets from the weight trend.
Sources
- USDA FoodData Central: Rice, white, long-grain, regular, raw, enriched (SR Legacy, FDC ID 168877) — Raw: 365 kcal and 11.6 g water per 100 g. Cooked entry FDC ID 168878 (https://fdc.nal.usda.gov/food-details/168878/nutrients): 130 kcal and 68.4 g water.
- USDA FoodData Central: Pasta, dry, enriched (SR Legacy, FDC ID 169736) — Dry: 371 kcal and 9.9 g water per 100 g. Cooked entry FDC ID 169737 (https://fdc.nal.usda.gov/food-details/169737/nutrients): 158 kcal and 62.1 g water.
- USDA FoodData Central: Chicken, broilers or fryers, breast, meat and skin, raw (SR Legacy, FDC ID 171474) — Raw: 172 kcal and 69.5 g water per 100 g. Roasted entry FDC ID 171075 (https://fdc.nal.usda.gov/food-details/171075/nutrients): 197 kcal and 62.4 g water.
- USDA FoodData Central: Beef, ground, 85% lean meat / 15% fat, raw (SR Legacy, FDC ID 171796) — Raw: 215 kcal and 65.7 g water per 100 g. Broiled patty entry FDC ID 174032 (https://fdc.nal.usda.gov/food-details/174032/nutrients): 250 kcal and 58 g water.
- USDA FoodData Central: Potatoes, flesh and skin, raw (SR Legacy, FDC ID 170026) — Raw: 77 kcal and 79.2 g water per 100 g. Baked entry FDC ID 170093 (https://fdc.nal.usda.gov/food-details/170093/nutrients): 93 kcal and 74.9 g water.
- USDA Table of Cooking Yields for Meat and Poultry, Release 2 (Nutrient Data Laboratory, September 2014), PDF — Definition of cooking yield, moisture change and fat change; explanation that cooked values are often calculated from raw using yield factors.
- USDA Table of Cooking Yields for Meat and Poultry, Release 2, Excel data file — Yields for NDB 5060 (chicken breast, meat and skin, baked or roasted: 72%, range 61-82%) and NDB 23573 (medium-fat ground beef patty, broiled or grilled: 69%, moisture -25.1%, fat -5.17%).
- Urban LE, et al. Accuracy of stated energy contents of restaurant foods. JAMA 2011 — 269 restaurant food items measured by bomb calorimetry; average agreement with stated values, but 19% of items had at least 100 kcal per portion more than stated.